The following touch screen was superseded by the CCTSS. The information provided below is for existing systems that are still in the field and may require maintenance or repairs


The CCTS is the small resistive user interface for earlier iZone systems

For a typical wiring layout click here









The front of the screen is made from painted plastic

Back housing

The back casing is made from painted plastic

Colour touch screen

Reset button

Press the reset button on the underside of the screen to reset the entire iZone air conditioning system

RJ 45 Connector

This where you connect the CFC12 or CFC23 CAT 5E cable

Wall bracket

Remove the wall bracket from the screen and mount it to a flat wall. Be careful not to over tighten the mounting screws if the wall is not flat as this will distort the wall bracket and the CCTSS will not clip back onto the wall bracket.

Wall bracket fixing holes

Use screws that sit flush inside the countersunk holes. If you use dome head screws the CCTS will not clip back onto the wall bracket

Ventilation holes

Ventilation holes are provided on the sides, bottom and back of the screen to encourage air circulation through the internals of the CCTS. This assists with cooling of the microprocessors and screens as well as inducing airflow across the internal air measurement sensors





Small Resistive Touch Screen Specification

Model numbers


Power supply

From C225, CNEM modules

Screen orientation

Portrait only

Screen graphic options

Classic only

Fascia & trim colours

Silver (Standard)

White, Black, Ocean Mist (Optional extra made from polycarbonate plastic)

Power and communication connection

RJ 45

Communications protocol


Operating Temperature

Room temperature

CCTS O/A Dimensions

Height    18 mm (Excludes RJ45 connector and wall bracket)

Width    82 mm

Length   122 mm

Wall bracket Dimensions

Height     4 mm

Width     61 mm

Length  100 mm

Holes       84 mm apart  (To suit typical wall box)


 145 g (Includes wall bracket)




Copyright © 2022 iZone Pty Ltd